Autosport Labs

IS it possible to be more specific on how to do the "job"
on using a edis8 on a oddfire engine, ia am very not into engines.

is it possible to use a Edis( modul into a 6 coil distrbutor?

Tried or heard about : Volvo V6 Peugeot/ Citroen V6 Renault V6 Engines running with megajoldt and ford EDIS and coilpacks. My setup is megajolt Lite ang ford edis 6 and coilpack with 6 "plugs" The PRV v6 should t be with "odd fire" spark, and i am not sure it works unless you tak...

Sorry to disturb you all. and sorry if i spelled sometthing wrong. but my question is : does Megajolt lite work on an PRV engine oddfire V6 i have installed it with TPS I know a guy also from denmark with a car similar to mine ,running with mega squirt, and it works. but i am not sure its working on...

It Is magnetic

But i was worried about the " trigger timing "
is not the same in " high" as in "low" but it doesent matter ??

GREAT then its not trigger problems i have...
THANKS
Lars

Sorry my mistake it is 36 -1
i spellled wrong.

but would it work with the "top" of the tooth not hvaving same size as the gap?

Hi there I have a toothwheel similar to the on on the picture. Is it possible to use that as trigerwheel. it have 32 tooth and is made og metal. i remember to read the trigger wheel setup should be the same distance in its "up and down" teeth i have it running in the car but i also have mi...

As you can see on the picture the printout form the link is under the coil

but i am not sure the "new" type coil has the same firing order as the old one, but i cant see why it shouldnt.

but on the page where i found the the firing order it dont seem the same.

sorry its 163524

but again its how the Coil is firing i am interested in. the rest is just wiring

Thank for responce
I did some research my self on the internet, and found out that
coil set A is 5-1
and coil set B is 3-4
and coil set C is 2-6
and EDIS6 firing order is A-C-B
my engine firing order is 163524
i should connect the plugs to 5-2-3-1-6-4

but to be sure ill better use my ohm meter

anyone who can describe on how to test it my self, the i can post on how the firing order is

Hi there Just assembled my megajolt assembly kit with rew limiter, and everything works :D ¨ But... i have the "new" type of 6 coil labeled Motocraft ee03a 1f2u-12029-ac taken from at mondeo v6 engine and is the wiring the same on this type and the firing order is not the same.... is there...