Autosport Labs

Very nice car you have there!

I've also used the Sierra CVH pulley - but I've had it machined down to accept the original alternator belt , it fits pretty much straight on to my engine , which is also CVH:

<img src="http://www.peck-ed.com/fate/P1011931%20(Medium).JPG">

If I can see characters displayed on hyperterminal when connecting power to the megajolt , does this mean the cable is working correctly? I get characters appearing when I connect the power , however no response to the "C" or "S" commands. Any help would be greatly appreciated as...

Well unfortunately it's not working anymore. I went away for a few hours , and when I tried to connect again it won't work. I have been trying to change the settings since and have probably made things worse for myself. However I have reinstalled the usb cable software a few times and even done a sy...

Thanks for the reply. I have managed to get it connected now , and it seems to work fine! Very happy , MAP reading 99 which seems good to me. I think it could have been software related as I hadn't copied comm.jar across properly? I have had to use the mjtuner software as the adist-mjtune software o...

My MJ unit is complete, I have used a 9v battery during the build to test voltages , but will this be enough to power the unit for a connectivity test with my computer or does it require 12v?

I have it powered with 9v and can't connect to it so far.

Hi I have a question , is it always necessary to have shielded cable for the VR sensor? -My EDIS module has no pin 7 (for earthing the shield as per the wiring diagram) -The wires for the VR sensor on the EDIS module do not appear to be shielded -I have read on here some people say earthing the shie...