vw 16v kr with carbs map wanted please.

breeza18 · Post by **breeza18** » Tue Dec 09, 2008 5:47 pm

hi all im new to the forum and megajolt but really interested in it, basicly im after a base map or something higher for mw vw golf. engine wise its a 2.0l 16v kr lump with zx9r bike carbs and tps, any help would be muchly appriciated!

cheers Ash

vr6 · Post by **vr6** » Sun Dec 14, 2008 8:39 pm

here are a few maps i run in my vw, these are original base maps that i changed to suit, i have used all 3 but find that no. 2 works the best for my set up. this is with tps.

engine spec..

vw 2.0 16v 9a standard block
vw golf mk2 kr 16v head mild port and polish
276 deg. inlet & exhaust cams
4 branch exhaust manifold with 2.5 inch system
dcoe 40 weber carbs , 36 vent. 145 main. f16 tube, 190 airs, 55f9 idle,45 pump, 4.5 aux. vent.

breeza18 · Post by **breeza18** » Mon Dec 15, 2008 12:22 pm

great stuff, i'l give em a go once im up and running, just needed an idea to look at. my engine is similar spec should be pretty close.
how do you find the megajolt? much more improvement over the dizzy setup?
thanks for the maps i'l let you know how they run!

vr6 · Post by **vr6** » Tue Dec 16, 2008 3:52 pm

there is no comparison with the original ignition for relibility and performance, and the ability to switch to another map is great, i run normally 95 unleaded but when in germany 100 octane is available from the pump. so a map with more igniton advance, more performance, there is the autobahn after all, it would be a shame not to

breeza18 · Post by **breeza18** » Wed Dec 17, 2008 1:34 pm

great cant wait to get it running now, think im gonna be using 98 super unleaded as its not a daily driver. 100 octane would be nice tho! what sort of power are you running then, and what cams? there next on my shoppin list!

vr6 · Post by **vr6** » Sun Jun 25, 2017 4:32 pm

file update 2017

ces · Post by **ces** » Sun Aug 06, 2017 3:04 pm

hi ,and thanks ,i use you're "golf 3 fix" file in my kr (1.8l) with 82 mm pistons and p"p head with ferrea valve .
it works well but my setting of dcoe etc create a missfire in one cylinder (?..)

Hynson · Post by **Hynson** » Tue Nov 21, 2017 1:49 pm

cese wrote:hi ,and thanks ,i use you're "golf 3 fix" file in my kr (1.8l) with 82 mm pistons and p"p head with all the dbal info ferrea valve .
it works well but my setting of dcoe etc create a missfire in one cylinder (?..)

Thanks VR6, just download and am giving it a try now!