4 AnalogX on the same CAN bus

Vrushabh · Post by **Vrushabh** » Thu Oct 05, 2017 5:38 pm

Jumpers on AnalogX lets you configure 4 AnalogX devices to run on the same CAN bus, agreed but I am confused which jumper you are talking about because the documentation for AnalogX does not specify some thing specific for 4 AnalogX together. Also how will we obtain CAN ID for each AnalogX input.

Post by **brentp** » Fri Oct 13, 2017 3:22 pm

Hi,

It is documented here:
https://wiki.autosportlabs.com/AnalogX#CAN_base_ID

The jumpers are on the bottom of the AnalogX board, and are labeled accordingly.

Hope this helps!

Vrushabh · Post by **Vrushabh** » Fri Nov 24, 2017 10:28 am

Is it possible to use 3 AnalogX on same CAN bus or it should be a pair of 4 ? Does it affect us in any case because 3 AnalogX will serve the purpose for me.

Thank you.

Post by **brentp** » Sat Nov 25, 2017 7:19 pm

You can use 1,2,3 or 4 AnalogX on the same CAN bus, by changing the jumper settings, documented in the WiKi.

Thanks,