timing is locked

[1303 RS]

hello
I use EDIS4 part number 91-AB-12K072-AA but my timing is locked to 10°BTDC,
is it possible that the module not compatible is with Megajolt Lite Jr

[1303 RS]

I have tried my edis with EDIS SAW Advance Word Simulator,but it remains same the problem my timing is locked on 10°BTDC

my print has been checked, everything look's ok

rgds

bart

[Oliver Sedlacek]

This is how the EDIS behaves if it doesn't receive a SAW signal. If you've tried a different SAW source, I would check for a break in the wiring.