Cant get 5v @ PS1 test location...

rickster · Post by **rickster** » Wed Jan 18, 2006 6:29 pm

I've double checked every joint, all locations except the PS1 location between the 2 middle pins tests out just fine...any advise?
Probing around I can get +5v on the 2nd and third pins out from the DB9 connector on the PS1 header...but not the middle 2? Is the refrence picture correct? I found it abit unclear..maybe highlight the pins to make it absolutely clear?

Thanks!

I added this picture to help clear things up...

<img src="http://rickster.rb-com.com/images/megajolt-1.jpg">

The pins marked in red are not getting +5v, the pins marked in blue are...

I'm also not using the MAP, but the TPS option instead if that makes a diffrence.

Post by **brentp** » Wed Jan 18, 2006 7:53 pm

I belive that's a mistake in the build documentation. Yes- I need to fix it!

rickster · Post by **rickster** » Wed Jan 18, 2006 9:52 pm

Thanks for the quick reply!
So it really is the pins marked in blue that should read +5v...