Ignition map for ford cvh engine...

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
Jenko
Posts: 67
Joined: Thu Jan 11, 2007 11:02 am

Ignition map for ford cvh engine...

Post by Jenko »

Engine Mfg: Ford CVH
Cylinders: 4
Displacement (cc): 2000
Rev Limit: 6500
TPS or MAP: TPS
Boosted or Normally Aspirated: Na
Modifications: 2 ltr block, zetec pistons, ported head, Piper 285C cam, twin weber 40's.....
Car: Westfield SEiW

Notes: This map was written using trial and error, I'm sure it could be optimised on a rolloing road....but works well, and am sure it work ok with a standard cvh engine also.........Contact me if you have any questions....
Attachments
mymap_3_after V3.2.1 upgrade.mjlj
(718 Bytes) Downloaded 1126 times

Jenko
Posts: 67
Joined: Thu Jan 11, 2007 11:02 am

Refined map....

Post by Jenko »

Further to the above post...here is another later map that uses less rpm Bins at the top end, so the resolution is slightly better low down....

Seems to work well on modified CVH engines...
Attachments
mymap_4_11_July.mjlj
(714 Bytes) Downloaded 1001 times

Post Reply