Label Idea

capri_turbo · Post by **capri_turbo** » Fri Jun 22, 2007 11:56 am

As I've been upgrading my V3 unit for map switching today, I thought about creating a label for the unit.

I also thought it might be a good idea to allow info to be written on the label, so I created one in Photoshop, printed it and laminated it to allow it to be written on, cleaned and rewritten. Any thoughts?

Post by **brentp** » Fri Jun 22, 2007 3:22 pm

An interesting idea- thank you.

If someone needs a memory jog like this then perhaps a sticker on the side, not unlike the serial #, product code stickers you'd see on commercial hardware. I've never seen that combined with the main product logo.

As for the usefulness, that would vary I suppose. Most people only have 1 (or two) of these ignition controllers, so it should be pretty easy to remember what firmware version they're running. The windows software also tells you what version it is (Help/About).

The part on the what maps are configured seems more useful, but I always envisioned that label being next to the switch on the dash or console that controls it.

Thanks!

DannyP · Post by **DannyP** » Fri Jun 22, 2007 11:22 pm

Is the new logo available on here? I printed an old-style logo, and the new one is just so, ah, new!

A friend of mine has a sign business so no prob to print out the file on vinyl. Thanks.

capri_turbo · Post by **capri_turbo** » Sat Jun 23, 2007 8:12 am

my memory is terrible, so i need to write things down, and what better place. It's similar to what we do at work.

As for the logo, I simply saved the image from the main page here and added bits in Photoshop.

Not sure that it is suitable for everyone, but it works for me.

DannyP · Post by **DannyP** » Sat Jun 23, 2007 10:55 am

Thanks, I thought of that after I posted. Sometimes I am a little slw on the uptake..

Ken555 · Post by **Ken555** » Fri Sep 07, 2007 8:33 pm

capri_turbo wrote:As for the logo, I simply saved the image from the main page here and added bits in Photoshop.

Is the file available somewhere ?

Ken555 · Post by **Ken555** » Thu Sep 27, 2007 10:33 pm

For those that are looking for a label, I made this one based on the design above

Hiperformance71 · Post by **Hiperformance71** » Fri Oct 12, 2007 10:30 am

Hello to all,

I'm with Brent idea, for a professional looking, the label is best to separate from the logo. I have tried a little graphical test, here my version of the label. What do you tink about?? Let me know!!

This label if for side mount.

Cheers

Autosport Labs

Label Idea

Label Idea

Made one