1380 mini maps?

mr_bridger · Post by **mr_bridger** » Sun Feb 03, 2008 10:39 pm

Anyone got a map for a 1380 NA mini? need a staring block to work from, so any 1275+ ebgine map should do (as long as CAM isnt above say 276)

Any help appreciated.

Ross.

Ken555 · Post by **Ken555** » Mon Feb 04, 2008 9:57 pm

Here's my current map,

A+ Series 1275cc (modified up to 1380cc)

MED engine, bored to 73.5mm with Omega pistons,
276 Kent cam,
lightened flywheel,
Stage 3 head with 36mm Inlet & 31mm Exhaust Valves.
Weber DCOE 45 carburetor

mr_bridger · Post by **mr_bridger** » Mon Feb 04, 2008 10:41 pm

Hi, Many thanks for that, similar spec to mine... has your car been on a rolling road?

Cheers

Ross.

Salamander · Post by **Salamander** » Tue Feb 05, 2008 1:41 pm

HI ken555

can you make a MAP to my engine? and upload to my post "Testing MJLJ->A-series 1380cc"

-New HIF44 BDL
-Inlet manifold minispares
-1380cc 73.5
-Stage 3 36-30 ported + chamber
-LCB millenium & RC40
-STD rockers (future swiftune 1.5 high lift)
-Swiftune 5 (future Swiftune 10)
-K&N filter
-11:1 CR
-Front radiator
-Lightened flywheel aeg-619

I watching your configuration MAP of your engine, why you start with 24ºand then drops to 8º?

Can you explain a little more the map for your engine.

sorry my english.

Ken555 · Post by **Ken555** » Tue Feb 05, 2008 7:38 pm

Salamander wrote:can you make a MAP to my engine?

I would use this map as a starting point.

Salamander wrote:I watching your configuration MAP of your engine, why you start with 24ºand then drops to 8º?

To prevent the car from stalling (stopping) when it is cold or first started, when the revs drop to 800rpm, it get quite a bit of advance that puts the revs back up a bit.

mr_bridger wrote:has your car been on a rolling road?

No not yet, a few more things to be done first.

Salamander · Post by **Salamander** » Tue Feb 05, 2008 8:06 pm

thanks i test your config in to my engine.