source for crimp on terminals required

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
philbert
Posts: 24
Joined: Wed Dec 05, 2007 8:37 pm
Location: Scotland

source for crimp on terminals required

Post by philbert »

Hi all Newbie question again :roll:

looking for the crimp on connectors for the edis module
does anyone know where they are available to buy?
or even the correct name for them?

Thanks
Phil
Attachments
connector (Large).JPG
connector (Large).JPG (35.86 KiB) Viewed 9258 times
Top
cng1
Posts: 282
Joined: Mon Dec 06, 2004 7:56 pm
Contact:
Contact cng1

Post by cng1 »

Those crimps are unobtainable I'm afraid. I'd love someone to prove me wrong though.
Top
philbert
Posts: 24
Joined: Wed Dec 05, 2007 8:37 pm
Location: Scotland

Post by philbert »

Bullocks!!

oh well just have to get handy with the soldering iron
Top
philbert
Posts: 24
Joined: Wed Dec 05, 2007 8:37 pm
Location: Scotland

Post by philbert »

Just an update.
friend is a ford tech and he thinks he can get them as part of a repair kit.
watch this space.
Top
ImpressIVPower
Posts: 4
Joined: Sat Sep 06, 2008 12:55 am

source for crimp on terminals required

Post by ImpressIVPower »

Hi

Check this site for the crimper

http://www.hansenhobbies.com/products/c ... /crimp_ec/

Miguel 8)
Top
philbert
Posts: 24
Joined: Wed Dec 05, 2007 8:37 pm
Location: Scotland

Post by philbert »

no joy with ford crimps only come as part of a very expensive repair kit!
My friendly spark gave me some other crimps he had in his box not the same but they fit and it fires up
so im pleased!
Attachments
P9070017 (Large).JPG
P9070017 (Large).JPG (49.88 KiB) Viewed 9075 times
Top
alexander
Posts: 246
Joined: Sat Jan 19, 2008 4:33 am
Location: sydney, australia.

Post by alexander »

do you know the name of these crimp terminals?

thanks
alexander
Top
philbert
Posts: 24
Joined: Wed Dec 05, 2007 8:37 pm
Location: Scotland

Post by philbert »

Alexander sorry i dont know the name of these crimps.
mates on holiday for 3 weeks will quiz him when he gets back.
Top
Alex B
Posts: 163
Joined: Sat Aug 09, 2008 10:32 am
Location: Hegra, Norway

Post by Alex B »

Does anybody know the procedure to get that Edis connector opened up in such a way that it is still usable afterwards?

Alex
Top
Alex B
Posts: 163
Joined: Sat Aug 09, 2008 10:32 am
Location: Hegra, Norway

Post by Alex B »

Never mind, already found something.

Alex
Top
Ken555
Posts: 92
Joined: Fri Sep 07, 2007 8:24 pm
Location: Aberdeenshire
Contact:
Contact Ken555

Post by Ken555 »

Alex B wrote:Does anybody know the procedure to get that Edis connector opened up in such a way that it is still usable afterwards?

Alex
yes http://www.ken555.plus.com/gtm/connectors.html see here
Top
Alex B
Posts: 163
Joined: Sat Aug 09, 2008 10:32 am
Location: Hegra, Norway

Post by Alex B »

Hi Ken,

That is exactly what I found :) . Thanks to your site I managed to open the connector without breaking anything.

Alex
Top
Post Reply

Return to “Installation”