Autosport Labs

Engine Mfg: Triumph
Engine Code: FM
Cylinders: 4
Displacement (cc): 1390 (BORED OUT 1300)
Rev Limit: 5900
TPS or MAP: mAP
Boosted or Normally Aspirated: na TWIN DCOE AND ALSO NOW ON HS4'S RUNNING AAA NEEDLES
If Boosted- max Pressure (KPa):
Modifications: AS LISTEED
Chassis: STANDARD
Notes:

My updated map from above but tweeked"
Rob

Here is my starter map for the Triumph Spitfire 1300 MKIV.
Large crank.
Lightened and balanced Crank.
gas flowed head.
Fast road cam.
Twin HS4's carbs running AAA needles.
Roller rockers.
91 BHP at the wheels.
Any Q's just ask.
Rob

It was the sensor leads back to front! I am using my own starter map fir the Triumph 1300. (Spitfire) Attached.
Thanks again
Rob

ITS ALIVE, ITS ALIVE.

Ran perfectly, wow what a difference! Idle better, runs smoother and cooler!
Recommended! and this is only my starter map!!
Rob

Brent, I have had a busy day today, I got the Crank pulley off and the 36-1 wheel fitted, the sensor bracket fabricated and fitted. The system was set up and tested. I have not been able to get the unit sparking? Two quick questions, how close does the sendor have to be to the wheel? Does the igniti...

Brent one last quickie!!

http://www.autosportlabs.net/MJLJ_V3_ve ... g_the_MJLJ

In relation to the diagram,,, USER OUT 1 AND THE 12v+ are they constant live? or switched ignition.

Thanks again

Rob

Superb, Thanks Brenk, Sorry for the hastle.
Rob

Pic now attached The other pic was a pic I got off a friend and his suggestions on wiring!
Rob

Brent, Thanks for the reply, I have opened it up and on the circuit board it states 2003/2005 V 3.0.0
I assume this is a V3.Board?
Rob

I have the Map MJL, is the below pic correct (in realation to the power and negative which replaces the TPS) or does the TPS points stay blank(empty)?
Rob

Brent, Styling is good, it just is not the same diagram I found easy to use last year! It was a colourful one which had both the EDIS and Megajolt pin wiring. I am also looking at building a rev light set, can I use a LED with 12v integral current limiting resistor? and would this save using a seper...

Nick,
THanks for that! This is not the one I remembered. Does anybody still have the original one?
Rob

I have had my Megajolt around 12 - 15 months, I have now run in the car (on the distributor) and am in the process of wiring the leads up for fitting over the next few weekeneds. There was a wiring diagram on this site for the Map version, it was a superb diagram and from memory was colourful and ea...

Josh, Gt6 Jim, rbalmford, Dave999
Bugger no wonder I could not find any set up instructions. WOW simple.
I am very sorry to have asked this, I am not that familar with the new fangled system. LOL.
Once again thanks for the replies.
P.S. Josh, where has your web site gone?
Rob