Autosport Labs

Will be getting my Mi16 on mikuni carbs and mj v4 tps rolling roaded sometime next week and i'll upload the map.

Looking for one as well.

I have two ground connections for the whole loom, one in the dash and one in the engine bay but they share the same wire. Is it only the software reporting a random error message when freezing or does the ECU really switch to the second ignition setup? Yes, I am using a USB-to Serial adapter I also ...

I made the wiring myself. Before I put it in the car I checked every wire for continuity connector to connector. The SAW output of the Megajolt fluctuates between 0.15 and 0.18V at the ECU out. Didn't check if the signal is getting to the EDIS connector and don't know how to check without removing t...

Seems the problem was with the coil grounding. Working fine now. Thanks.

I did an 8v to 16 conversion so it's a different engine. I did keep the fueling and carbs from the old engine (same cc) so there shouldn't be any problems with fueling. The spark looks strong, if I keep the plug 1 cm from the head i still get a spark, don't know if this is relevant to how strong it ...

I've installed the Megajolt MAP system to my Peugeot 205 1.9 Mi16 running bike carbs, but it just won't start. System: -Megajolt V4 running latest firmware, std map, Ford Edis4, Ford coil, Ford VR sensor, new NGK plugs, new NGK plug leads from Fiesta RS Turbo (only ones that fit my head) Situation s...

The shop next to the one my car's in is a bike repair shop and they have vacuum gauges. I'll have to see how the vacuum behaves, if not I'll have to find a way to use the injection TPS with the carbs. I need to figure out which of the two systems I need because the dizzy vacuum capsule is broken and...

I have a Peugeot 205 Gti 1.9 8V running Mikuni carbs from a GSX-R1100 (no TPS) and a Kent PT23 Race cam with 304 degrees duration and 12.4 valve lift. I've built a vacuum reservoir from a ~300mm long 40mm diameter pipe, connected via 4 nozzles to the inlets, each 10 mm internal diameter and approxim...