Autosport Labs

This is an old thread, but i am looking for an igntion map for an aircooled vw engine.........

finally...... I plugged into my old laptop (the one i will program in-car with) and it had no problems with communication.

Flashed my chip. Ready to install in the car now.

Thanks for the help

the power was cut possibly while programming....... it sat forever (counting up) after it seemed to work uploading firmware. so i unplugged it

did i mess up the chip? do i need a new one? it worked before that.

I have both chips because i originally bought the earlier board, then bought the late board and processor........ Now i am assembling and dont know how to tell them apart. One has an obvious motorola logo on it. the numbers on both chips are: Motorola chip MC68HC908 KX8CP 2L09H CPAH0403 Other chip M...

Ok....Now i get an error:

C:\MJ>hc08sprg COM1 mjlJunior_3.0.0.s19
Waiting for HC08 reset ACK...received 0xfc (good).
Can't read MCU info (forgot to set single wire mode?)

Yes, i can make more. Let me contact my laser guy and see what small quantities will be. i had him quote 25, i will see what 4-5 will cost and then i will post a price. btw here was the format for posting pics. I have the pic hosted on my own photo site. < img src="YOUR IMAGE PATH HERE"/ >...

My laser cut trigger wheel came in the other day..... Now to wrap up the rest of the parts and get em into my '75 VW Superbeetle....
Can't wait.
<img src="http://www.pbase.com/tedzillich/image/44253246.jpg"/>

I am having a trigger wheel cut for myself for my '75 super beetle. I followed a design i found on here except i made the teeth tapered from top to bottom like the factory wheels i have seen. I also had it burned from 3/8" thick steel plate. Will post pics once the wheel is in this week. If it ...

So how did the test go?

What are the specs of your engine, intake, etc.? If you dont mind.

I am getting ready to run this setup on my '75 super beetle and doing some learning myself.

Yes, the 009 is terrible, this car falls flat on its face when i hit the gas good. It also has a terrible advance curve for this setup. I am going to run vacuum from both manifolds to a canister then into the MJLJ from there. Hopefully be doing this in the next couple weeks. Want to get some power a...

I have a stock 1600cc dual port engine in my super beetle with dual solex/kadron carbs. There is currently no vacuum port on them. Do i need a specific vacuum port or can i just install one on one of my or both of my manifolds and run them together? http://www.pbase.com/tedzillich/image/40392289.jpg

I have a guy that said he can get my board wave soldered for me.

I see that there is a certain order to assemble the board.

Can i get this wave soldered, is there a specific instruction to go this route that anyone might be able to help me with?

Thanx ahead
Ted