Autosport Labs

Try swapping VR sensor polarity. On your EDIS module swap wires on pin 5 and 6.

Id test it too. I got simple relay cut off in my Mustang. How much?

Follow the steps in this post, report with results:
<a target="_blank" href="http://www.picasso.org/mjlj/?q=node/133 ... ode/133</a>

Try taking the USB-2-Serial in question and installing it again, the procedure for proper installation is as follows: <ud> <li>1. Insert USB-2-Serial into the USB hole on your laptop, then insert drivers CD into the CD-ROM.</li> <li>2. When prompted to install drivers, select option for installing a...

This person might have a map for you: <a href="http://mjlj.mysite.wanadoo-members.co.u ... .co.uk/</a>
Click on Gallery and then Contant Me.

Id never use anything made by GM or Chrysler. They had a race here in St. Petersburg, brand new STSs came from the rear to the front and dominated the race, until last lap, when ignition failure caused them a finish. They didnt just not finish first, they didnt finish period! And guess what, electro...

89 to 95 SHOs had DIS ignition, Ill ask for you.

Brent, this info might help: <a target="_blank" href="http://www.wrenchead.ca/HTML%20Presentation%20folder/sld063.htm">http://www.wrenchead.ca/HTML%20Presentation%20folder/sld063.htm</a> Just press forward button, single >, not double >>. I think I stumbeled on mother load there....

Your software works with my USB-2-Serial, which also has prolific chipset. It starting working after the fix.

<blockquote>will be running Emerald or DTA.</blockquote> May I ask why you going that route? A few words to persuade you against this move: tuning software of Emerald and DTA is horrible, and isnt updated that often. Hardware of those controllers is not updated often too, same goes for firmware. And...

Driver for that one says Prolific Technology Inc..

Brents new tuning software allows for TPS calibration. So it doesnt matter which TPS you use now, as long as you are able to calibrate it, and as long as your TPS is operational, i.e. smooth resistance change as you rotate it from closed to full throttle. The latter is another reason for using MAP, ...

Tell us the model of Bosch FI, we might be able to look it up and tell you if it will work.
<P></P>
<P></P>
Preliminary thoughts say that it should be possible.

I cant wait for MJ to support knock sensing. On the right, in top 5 most recent files, there is knock.zip, which describes how to make a knock indicator. It suppose to buzz and light up when knock is present. It was taken from a website which is known for a lot of very accurate information about fue...

I only have 4, I thought I had 8. So visit to junk yard is required, which Im not planning anytime soon. <a target="_blank" href="http://cgi.ebay.com/ebaymotors/Ford-Explorer-Spark-Plug-Wires-used-5-0-V8-GT40P-1999_W0QQcmdZViewItemQQcategoryZ33693QQihZ018QQitemZ280052073893QQrdZ1QQssp...